Montelierre

Fuji Straight Joint 1X1 Stepwise Matte

Fuji's warm sandy base settles into a classic grid in the 1X1 straight-joint mosaic, each small square set edge to edge without a staggered offset. The matte finish keeps the surface consistent with Fuji's larger floor sizes, and StepWise® technology carries that slip resistance down to the smaller format.
Countertop
Countertop
Floor
Floor
Wall
Wall
Exterior Floor
Exterior Floor
Shower Floor
Shower Floor
Special Features
Stepwise StepWise
Other Available Colors

Overview

The tight, straight-joint grid gives Fuji's golden veining a quieter presence than the plank or square sizes do, breaking the movement into smaller, more frequent increments across the surface.
DAL_MT59_1x1_Msc_Fuji_MT_LivePanel_01
×
Size:
Finish:

Design Note

This format suits a shower wall or a backsplash-style accent meant to echo a Fuji floor used elsewhere. Rattan pendants and warm wood shelving continue the sun-bleached palette. Because the grid stays so understated, 1X1 straight-joint Fuji also works as a full accent wall without overwhelming a room already built around natural materials.
  • Product Details

    Collection Name Montelierre
    Color Code MT59
    Color Name Fuji
    Color Family Gray
    Nominal Size 1X1
    Actual Size 9.843 X 9.843
    Nominal Thickness 1/4
    Nominal Mounted Sheet Size 10x10
    Mount Method Dot Mount
    Size Category Small
    Country of Origin Mexico
    Finish Matte
    Body Type Glazed Mosaics
    Edge Non Rectified
    Mosaic Pattern Straight Joint
    Shade Variation V2 MEDIUM VARIATION
    Pre-Consumer Recycled 40.6
    Post-Consumer Recycled 1.3
  • Application

    Countertop
    Countertop
    Floor
    Floor
    Wall
    Wall
    Exterior Floor
    Exterior Floor
    Shower Floor
    Shower Floor
    Target Dcof Wet Suitable
    Dry & Level - Interior Floor N/A ✔
    Wet & Level - Interior Floor ≥0.42 ✔
    Shower Floors (Residential or Light Commercial) ≥0.42 ✔
    Exterior Floor Applications (including pool decking & other wet areas with minimal footwear) ≥0.60 ✔
    Ramps & Inclines ≥0.65
    Walls/Backsplashes N/A ✔
    Countertops N/A ✔
    Pool Linings N/A ✔
    1/8"

    ●  Manufacturer Advisory: All tile is measured by the DCOF AcuTestTM method. Tiles with DCOF values less than 0.42 are not recommended for use in areas with wet or slippery conditions. For more information, see ANSI standard A137.1 section 6.2.2.1.10, available at www.tileusa.com.

    ●  Suitable for exterior applications in freezing and non-freezing climates, when proper installation methods are followed.

  • Specifications

    Performance Chart
    Test Method Result
    Water Absorption ASTM C373 < 3.0
    Breaking Strength ASTM C648 > or equal to 250 lbf
    Scratch Hardness ASTM MOHS 4.0-8.0
    Chemical Resistance ASTM C650 Resistant
  • Download Tear Sheet

    Fuji Straight Joint 1X1 Stepwise Matte

    View PDF
  • Special Features

    Special Features
    Stepwise StepWise